Filter
Top Products
5. Adjusting the Position of the Mirrors (optical length of No. 1, 2, and 3 mirrors)
1) Keep the mirror positioning tool handy.
(See “3. Assembling the Mirror Positioning Tool.”)
2) Move the No. 1 mirror mount toward the front, and align the angular hole in the front
side plate and the cable fixing screw q.
Figure 3-412
3) Loosen the set screw on the pulley.
4) Set the mirror positioning tool w to the No. 1 mirror mount and the No. 2 mirror mount
(both front and rear).
Figure 3-413
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
3-16
q
(front) (rear)
(front)
(front)
Mirror positioning tool (front)
Mirror positioning tool (rear)