Filter
Top Products
4. After Replacing the Drum Unit
Whenever you have replaced the drum unit, enter the date of replacement and the
current counter reading on the label (Figure 10-226) that came with the drum unit; attach
the label to the front cover of the new drum unit, and perform the image basic adjustment
procedure.
Figure 10-226
5. Attaching the Drum Heater
1) Detach the front cover.
2) Open the copier’s top body by operating the copier open/close lever.
3) Remove the two fixing screws w, and detach the harness cover q.
Figure 10-227
4) Detach the transfer roller and the static eliminator.
5) Detach the transfer guide.
6) Butt the two heaters against the transfer guide as shown in Figure 10-228, and fix the
two mounts with two screws e; further, fix the harness in place using two harness
bands r (front, rear).
Figure 10-228
10-23
CHAPTER 10 TROUBLESHOOTING
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)