Filter
Top Products
6) Remove the slack from the cable between the copier and the RDD; keep the excess
cable to the RDD using the harness band !0.
Fig. 8-708
7) Shift bit 4 of the DIP switch 2 !1 to ON so that the communication mode between the
RDD and the copier is IPC mode.
Fig. 8-709
8) If the ROM IC6 !2 is mounted on the RDD’s PCB, shift bit 7 of the DIP switch 2 !3 to
ON; otherwise, shift bit 7 of the DIP switch 2 to OFF.
Note:
1. If the ROM (IC6; !2) is not mounted, you need not mount it.
2. If you are mounting or replacing the ROM (IC6; !2 for upgrading the RDD, be
sure to shift bit 7 of the DIP switch 2 !3 to ON.
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-30
CHAPTER 8 INSTALLATION
!0
LED1LED2 LED3
2
1
LED5
LED6
LED4
IC6
SW1
SW4
SW3
6
1
BAT1
CN4
1
2
CN3 CN2
12345678
!1
SW2