Filter
Top Products
E. Developing System
1. Removing the Developing Assembly
1) Open the copier’s front door.
2) Operate the open/close lever to open the top body.
3) Turn the locking lever q clockwise to unlock the developing assembly.
4) Remove the screw w.
5) Pull the developing assembly e slowly to the front.
Figure 4-329
2. Removing the Blade Assembly
1) Remove the developing assembly from the copier.
2) Remove the four screws q, and remove the developing cover w.
Figure 4-330
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-47
1
3
2
w
q
q