Filter
Top Products
6) Set the paper size plates selected in step 4).
Figure 8-205
Caution:
If you are setting the plate for the position representing the universal (u) cassette,
you must perform the work described for “universal cassette paper size setting
(505); see p. 10-44.
■ Points to Note When Handling the Photosensitive Drum after Installation
The copier’s photosensitive drum is highly susceptible to light; mere exposure to
room light can affect the drum enough to produce white spots or black lines on the
copies. Keep the following in mind:
• Do not spend more than 5 min when removing jams.
• After detaching the drum unit from the copier during servicing work, be sure to
protect it in the light-blocking sheet that came with the drum or fresh copy paper,
and place the drum in a dark place.
Do not touch the photosensitive drum or primary charging roller.
If you have soiled the surface of the drum inadvertently, wipe it using a flannel cloth
coated with toner; do not use paper, lint-free or otherwise.
Do not dry wipe or use solvent to clean the drum.
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-12
CHAPTER 8 INSTALLATION
After setting the size plate, make sure it corresponds to the paper size you have selected.