Filter
Top Products
9. Selecting the Density Adjustment Method for Standard Mode ( )
1) Hold down the AE key for 4 sec or more.
• The display indicates “ ”.
2) Enter o using the keypad so that the display indicates “ ”.
3) Press the Start key.
• The display indicates ‘9-1’.
Table 1-407
4) Enter q or p using the keypad to select AE or manual so that the display indicates
the new specification (if manual, indicates ‘9-0’).
5) Press the Start key.
• The new specification is stored, and the display returns to “ ”.
6) Press the AE key.
• The copier returns to standby state.
10. Initializing User Mode ( )
1) Hold down the AE key for 4 sec or more.
• The display indicates “ ”.
2) Enter p using the keypad so that the display indicates “ ”.
3) Press the Start key.
• The display indicates ‘0-1’.
4) Enter p using the keypad.
• The display indicates “ ”.
5) Press the Start key.
• User mode is initialized, and the display returns to “ ”.
6) Press the AE key.
• The copier returns to standby state.
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
1-17
Selecting the density adjustment method for standard mode
AE (automatic)
Manual
Settings
9-1
9-0