Filter
Top Products
CHAPTER 10 TROUBLESHOOTING
10-96
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
No.
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
AE_LIGHT
AE_SHIFT
AE_SLOPE
HEATER
REGIST
LE_BLANK
REGIST_R
LE_BLANK_R
TE_BLANK
TE_BLANK_MF
B_HOME
B_HOME_RE
PRIMARY
IP_OFST
PW_OFST
IP_ADJ
PH_ADJ
ATVC_STD
MF_LOOP
C1_LOOP
C2_LOOP
C3_LOOP
C1_CL_OFF
C2_CL_OFF
C3_CL_OFF
LIGHT
TYP
7. Recording on the Service Mode Label
Figure 10-702 shows the label attached behind the front door. At the factory, each
machine is adjusted, and the settings used at the time are recorded on the label.
You must record new settings if you changed them in the field. If you replaced the DC
controller, be sure to store the settings recorded on the label in service mode.
In addition, if you have replaced drun unit or the composite power supply, enter the
settings recorded on the service label attached to the new drum unit or composite
power supply and, at the same time, copy the setting on the service label (Figure 10-
702)
Figure 10-702