Filter
Top Products
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-15
CHAPTER 8 INSTALLATION
Work
Fill out the label, and attach it
to the drum unit cover.
Lock the developing assembly,
and close the copier’s top unit.
Turn on the door switch using
the door switch actuator; then,
shift the power switch to ‘ON’.
Select service mode No.
313/314, and enter the settings
recorded on the drum label.
To select service mode,
• Press the service mode
switch (SW302) with a hex
key.
Select ‘3’ of the mode by
pressing ‘3’ on the keypad
and AE key; then, select ‘No.
3 xx’ by pressing ‘x’ and ‘x’
on the keypad and the start
key.
Turn off the power, and open
the copier’s top unit.
Replace the static eliminator.
Turn on the power.
Remarks
To enter settings,
• Select ‘No. 313’ in service mode, and enter the
setting recorded on the label (PRIMARY) using
the keypad. (To enter ‘-’, press the % key before
entering the setting.)
Then, press the Start key to store the setting.
To enter the setting for IP_OFST, select ‘No. 314’
in service mode and work in the same way.
Step
6
7
8
9
10
11
12