Filter
Top Products
Installing the CAPT Software
3-5
Setting Up the Printing Environment
3
Installing the CAPT Software
This section describes the procedure for installing the CAPT software on a
computer that is directly connected to the printer using a USB cable.
• For Windows 98/Me (See p. 3-6)
• For Windows 2000 (See p. 3-21)
• For Windows XP/Server 2003 (See p. 3-37)
IMPORTANT
•
The CAPT software is required for printing using this printer. Make sure that you install it.
•
If there is not enough free space remaining on the hard disk, the following dialog will
appear during the installation. Click the [OK] button to quit the installation and create
more space on the disk before beginning the installation again.
NOTE
•
For details on the procedure for installing this software when the optional network board
is installed in the printer and the computer is connected to the printer over a LAN, refer to
the users manual supplied with the AXIS 1611.
•
For details on the procedure for installing this software when the printer is shared on the
network from one computer and you are printing from another computer over the
network, see "Printing from a Network Computer using a Shared Printer," on p. 3-58.
•
A USB cable is not supplied with the printer. Obtain a USB cable that matches the
computer you are using.