Filter
Top Products
Installing the Network Board (AXIS 1611)
6-17
Optional Accessories
6
6
Connect the LAN cable.
Make sure to use a LAN cable that is compatible with the LAN socket on the
network board as appropriate for the network you are using.
NOTE
A LAN cable is not supplied with the network board. If you are installing the network
board to connect the printer to a network, you will need a category 5 twisted pair
cable. Cables, hubs, etc. should be obtained separately as required.
7
Connect the other end of the LAN cable to a hub.
8
Connect the interface cables except for the USB cable, and
connect the power cord.
9
Plug the power plug into the AC power outlet.
10
If necessary, connect the USB cable.