Replacing Toner Cartridges
5-16
Routine Maintenance
5
•
When handling a toner cartridge, hold it properly as shown in the figure. Do not stand it
on its end, or turn it upside down.
•
Do not attempt to disassemble or modify the toner cartridge.
•
If you expose a toner cartridge to rapid changes in temperature, droplets of water
(condensation) may form on the interior and exterior of the cartridge. If a new toner
cartridge that has been stored in a cool location is going to be installed in a warm area,
leave the cartridge for two or more hours without opening the protective bag to allow the
cartridge to adjust to the surrounding temperature before opening the bag.
•
Be sure to use new toner cartridges before the expiration date indicated on the package.
Storing Toner Cartridges
Take care of the following points when storing a new toner cartridge or handling a
toner cartridge that has been taken out of the printer for maintenance or to move
the printer.
IMPORTANT
•
Do not take a new toner cartridge out of the protective bag until you are ready to use it.
•
If a toner cartridge is removed from the printer during maintenance, attach the protective
cover immediately and place it in the protective bag that it came in or wrap it in a thick
cloth.
•
Do not stand it on its end, or turn it upside down. Store the cartridge in the same direction
as when it is installed in the printer.
•
Do not store the toner cartridge in a place exposed to direct sunlight.
Protective Cover