Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
3-21Chapter 3 Speed Dialling
Using Group Dialling
To send a fax to a group, follow these instructions.
Be sure to adjust the document feed lever before loading your document. See
page 6-5 for details.
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
½ If necessary, you can adjust the resolution and contrast. See page 4-3 for
details.
2. Use the one-touch speed dialling buttons and/or the CODED DIAL button
(along with the two-digit codes) to select the groups registered under those
buttons and/or codes.
½ If you make a mistake when selecting a group, press the
(STOP) button
and start again.
1
6
~
R
and/or
CODED DIAL
1 2
ABC
3
DEF
4 5
JKLGHI
6
MNO
7 8
TUVPQRS
9
WXYZ
0
½ You can make up to 55 groups.
½ If you press a one-touch speed dialling button or coded speed dialling code
that has no group (or fax number) registered under it, the LCD displays NO
TEL #. Make sure you pressed the correct one-touch speed dialling button or
entered the correct coded speed dialling code, and that the group you want
has been registered correctly under that button or code.
½ After entering a one-touch speed-dialling button or coded speed dialling code,
you have five or ten seconds to press each subsequent speed-dialling button or
code before the MultiPASS C50 begins sending.
3. When you finish entering groups, press START/COPY.
½ The MultiPASS C50 then scans the document into memory, and begins
dialling the numbers in the groups.