Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
2-52 Chapter 2Setting Up Your MultiPASS C50
Printing on FS-101 Fabric Sheets
Follow these steps to load and print on Canon’s FS-101 fabric sheets.
½ Read and follow the precautions and handling instructions included with the
FS-101 fabric sheets.
½ Do not use the fixing agent that is supplied with the FS-101 fabric sheet. This
agent is not needed when printing with the MultiPASS C50.
½ Do not touch the printing on a newly printed fabric sheet until the ink has
dried completely (normally about an hour).
1. Open the printer cover by grasping the document guides and lifting.
½ Make sure the paper thickness lever is set to the right. See ”Adjusting the
Paper Thickness Lever” on page 2-42.
2. With the cloth side facing you and the open end up, insert one sheet into the
sheet feeder until it stops, and align the paper guide with the edge of the
sheet. You are now ready to print.
OPEN END AT THE TOP