Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
2-68 Chapter 2Setting Up Your MultiPASS C50
The MultiPASS C50 Unit Settings
Details on the settings that can be adjusted from the MultiPASS C50 operation
panel are listed in the table below. For detailed instructions on accessing these
settings, refer to the page numbers indicated in the table.
The factory default settings in the table below are shown in bold type.
Setting Description Settings Page
TEL REGISTRATION
1-TOUCH SPD DIAL See ”One-Touch Speed Dialling”. – 3-3
CODED SPEED DIAL See ”Coded Speed Dialling”. – 3-10
GROUP DIAL See ”Group Dialling” – 3-17
USER SETTINGS
DATE & TIME Enter the date and time. – 2-58
UNIT TELEPHONE # Enter your fax/telephone number. – 2-58
UNIT NAME Enter your name or company name. – 2-58
SCAN CONTRAST Sets the scanning contrast of the faxes you
send.
STANDARD
/DARKER/LIGHTER
4-4
VOLUME CONTROL
CALLING VOLUME Sets the volume of the ring produced when
the MultiPASS C50 detects a voice call
during fax/tel switchover.
VOL MID/VOL MAX/
VOL MIN
2-71
KEYPAD VOLUME Sets the volume of the keypad touch beep. VOL MID/VOL MAX/
OFF/VOL MIN
2-71