Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
8-19Chapter 8 Troubleshooting
Printing Problems
If you are having problems printing with the MultiPASS C50, check the problems
and solutions listed in the following table.
Problem Possible cause Solution
The ALARM light comes on
and the MultiPASS C50 beeps
while printing
The MultiPASS C50 may have
a paper jam.
Clear any paper jams as
described above.
If the MultiPASS C50 has no
paper jam, unplug it, wait 5
seconds, then plug it in again. If
the problem is fixed, the
ALARM light will be off, the BJ
cartridge will move to its home
position, and the LCD display
will show the time and receiving
mode (standby mode).
If the ALARM light stays on,
call your local authorised Canon
dealer or the Canon help line.