Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
1-14 Chapter 1Introducing the MultiPASS C50
Safety Instructions
Read these safety instructions thoroughly before using your MultiPASS C50, and
keep them handy in case you need to refer to them later.
Except as specifically described in this manual, do not attempt to service the
MultiPASS C50 yourself. Never attempt to disassemble the unit: opening and
removing its interior covers will expose you to dangerous voltages and other
risks. For all service, contact your local authorised Canon dealer or the Canon
help line.
½ Always follow all warnings and instructions marked on the MultiPASS C50.
½ Use the MultiPASS C50 only on a sturdy, stable, level surface. If the
MultiPASS C50 falls, it could be seriously damaged.
½ Do not use the MultiPASS C50 near water. If you spill liquid on or into the
unit, unplug it immediately and call your local authorised Canon dealer or
help line.
½ The back and bottom of the MultiPASS C50 include slots and openings for
ventilation. To keep the MultiPASS C50 from overheating (which can cause it
to operate abnormally and create a fire risk), take care not to block or cover
these openings. Do not operate the unit on a bed, sofa, rug, or other similar
soft surface, or near a radiator or other heat source. Do not place the
MultiPASS C50 in a cupboard or cabinet or on shelves unless adequate
ventilation is available. See ”Choosing a Location for Your MultiPASS C50”
on page 2-3 for guidelines on how much space the unit needs for ventilation.
½ Operate the MultiPASS C50 only from the type of power source indicated on
the unit’s label. If you are not sure of the type of power available from your
wall outlets, contact your local power company.
½ Make sure the total amperage used by all devices plugged into the wall outlet
does not exceed the ampere rating of the outlet’s circuit breaker.
½ Do not allow anything to rest on the power cord or place the MultiPASS C50
where the cord will be walked on. Make sure the cord is not knotted or
kinked.