Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
2-19Chapter 2 Setting Up Your MultiPASS C50
2. Plug the other end of the power cord into the outlet.
The MultiPASS C50 has no power switch, so its power is on as long as it is
plugged in. Once connected, though, the unit still needs to warm up before you
can use it. Depending on the number of pages accumulated in its memory, the
MultiPASS C50 can take up to four minutes to warm up.
½ While the MultiPASS C50 is warming up, the message PLEASE WAIT
appears in the LCD display:
PLEASE WAIT
½ When the time and receive mode appear, the MultiPASS C50 is in standby
mode and ready for use:
13:30 FaxOnly
If the BJ cartridge has not been installed yet, the message PUT IN
CARTRIDGE alternates with the standby mode display:
PUT IN CARTRIDGE
13:30 FaxOnly