Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
4-10 Chapter 4Sending Faxes
Memory Sending
Memory sending is a quick and easy way to send a fax. When you use memory
sending, the MultiPASS C50 scans the document into its memory as it dials the
fax number. If the line is free, the MultiPASS C50 begins sending the fax as it
scans the rest of the document.
The MultiPASS C50 has enough memory to store up to 42 pages (fewer if the
document contains many graphics or particularly dense text).
Since the MultiPASS C50 is a multitasking device, you can use memory sending
to scan one document into memory and at the same time send another fax,
receive a fax, or print a document. Follow the instructions below to send a
document with memory sending:
Be sure to adjust the document feed lever before loading your document. See
page 6-5 for details.
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
½ Once the document is loaded, the LCD display shows the following:
MEMORY USED 0%
(Currently used image memory)
STANDARD
(Current resolution)
DOCUMENT READY
(Standby to scan)
½ If necessary, you can adjust the resolution and contrast. See page 4-3 for
details.
½ You may not be able to use memory sending if the percentage shown in
the MEMORY USED display is close to 100%. In this case, use manual
sending via the handset to send your document.