Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
2-50 Chapter 2Setting Up Your MultiPASS C50
Using Canon’s Specialty Papers
Canon provides several different specialty papers you can use with your
MultiPASS C50.
Printing on High Resolution Paper HR-101
Use the following procedure to load High Resolution Paper HR-101:
1. Open the printer cover by grasping the document guides and lifting.
½ Make sure the paper thickness lever is set to the centre. See ”Adjusting
the Paper Thickness Lever” on page 2-42.
2. Close the printer cover.
3. Pull the paper rest up until it stops.
4. Load the paper into the sheet feeder as described in ”Loading Print Media
for Automatic Feed” on page 2-45.
5. Raise the output guides as described in ”Using the Paper Output Guides with
the BC-22/22e and BC-29F Cartridges” on page 2-53.
6. When you are finished printing, remove the remainder of the HR-101 paper
from the sheet feeder.
Using the Cleaning sheet (included in the HR-101 package)
The HR-101 package includes a cleaning sheet used to clean the MultiPASS C50
rollers. Use this sheet after printing on 100 sheets (the contents of the package).
1. Remove the covers of the two pieces of tape on the cleaning sheet.