Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
2-3Chapter 2 Setting Up Your MultiPASS C50
Choosing a Location for Your MultiPASS C50
Before unpacking your MultiPASS C50, follow these guidelines to choose the
best location for it.
Please review the information provided in ”Safety Instructions” on page 1-14, to
make sure you are installing your MultiPASS C50 for safe use.
½ Put the MultiPASS C50 in a cool, dry, clean, well ventilated place:
¼ Make sure the area is free from dust.
¼ Make sure the location is not affected by extreme temperature changes,
and always stays between 10g and 32.5gC.
¼ Make sure the area’s relative humidity is always between 10% and 90%.
½ Keep the MultiPASS C50 away from direct sunlight.
½ If possible, put the MultiPASS C50 near an existing telephone outlet, to avoid
the expense of installing a new one.
½ Place the unit near a standard 200-240 VAC power outlet.
½ Place the MultiPASS C50 near the PC you will be connecting it to. Make sure
you can reach it easily, as you will be using it as a printer, fax machine, copier,
scanner, and telephone.
½ Do not plug the MultiPASS C50 into the same circuit as an appliance such as
an air conditioner, electric typewriter, television, or copier. Such devices
generate electrical noise that can interfere with your MultiPASS C50’s ability
to send or receive faxes.
½ Set the MultiPASS C50 on a flat, stable, vibration-free surface that is strong
enough to support its weight (about 5.6 kg).
½ Make sure the location you choose provides enough space around the
MultiPASS C50 for adequate ventilation, and to allow paper to flow freely
into and out of the unit. The figure below shows the minimum space required
for the unit.