Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
2-42 Chapter 2Setting Up Your MultiPASS C50
Adjusting the Paper Thickness Lever
Before loading a print medium into the MultiPASS C50, use the paper thickness
lever to adjust the gap between the print head and the print paper to suit the
paper’s thickness.
If the gap between the print head and the paper is not adjusted properly,
smudging or otherwise poor print quality can result.
Set the paper thickness lever as follows:
1. Press CARTRIDGE to move the cartridge holder to the centre of the unit.
CARTRIDGE
2. Open the printer cover by grasping the document guides and lifting.
DO NOT TOUCH THE RIBBON
CABLE
DO NOT TOUCH THE GUIDE
RAIL
DO NOT TOUCH THE ROUND
SHAFT
Do not try to move or stop the cartridge holder manually, or you may damage the
MultiPASS C50.