Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
8-14 Chapter 8Troubleshooting
Receiving Faxes
Problem Possible cause Solution
The MultiPASS C50 cannot
receive faxes automatically
The MultiPASS C50 may not
be set to receive faxes
automatically.
For the MultiPASS C50 to
receive faxes automatically, it
must be in FaxOnly, AnsMode,
or FaxTel mode. See page 5-2.
The MultiPASS C50 may have
a document in memory,
leaving little or no memory
available.
Print out any documents stored
in memory. See page 5-12.
An error may have occurred
during reception.
Check the LCD display for an
error message. See page 8-30 for
a listing of the MultiPASS C50’s
error messages.
The sheet feeder may be
empty.
Make sure the sheet feeder has
paper in it.
The telephone line may not
be connected properly.
Make sure all phone line
connections are secure.