Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
4-25Chapter 4 Sending Faxes
If a Power Cut Occurs
If power to the MultiPASS C50 is cut off, any documents stored in its fax memory
will be lost. (The MultiPASS C50 automatically prints a list of the lost documents
when power is restored.) Because of this, you should be sure to print documents
stored in memory or resend them as soon as possible.
While power is off, you can only use the MultiPASS C50 to receive telephone
calls (if you have an extension telephone connected). You cannot make calls, or
send or receive faxes.
Memory Clear Report
If you experience a power failure, all documents stored in memory will be lost.
As soon as power is restored, the MultiPASS C50 will automatically print a list of
documents that were stored in memory before the power failure.
16/12 98 WED 10:12 FAX 321 456 7777 CANON U.S.A.
.
001
***************
**MEMORY CLEAR REPORT
***************
MEMORY FILES DELETED
TX/RX NO MODE CONNECTION TEL/ID PGS. SET TIME ST. TIME
0001 B’CAST [ 01] Canon TOKYO 3 17/12 98 09:07
[ 02] Canon ESPAÑA 04:30
0002 TRANSMIT [ 02] Canon TOKYO 1 17/12 98 10:02 02:00
If there are one or more documents in the image memory when the power is cut
off, the LCD will display PRINTING REPORT when the power is restored. If
there is no paper in the sheet feeder at this time, the LCD will also display
LOAD PAPER. If this happens, load paper in the sheet feeder, press the
(START/COPY) button and wait for the unit to print the Memory Clear Report.
You will be unable to send documents or receive faxes in memory until you do
this. If you have no paper available and you urgently need to send a document or
receive a fax in memory, press the
(STOP) button to enable sending and
receiving. However, please note that once you have pressed the
(STOP)
button, the unit will no longer print the Memory Clear Report.