Filter
Top Products
Canon MultiPASS C50 Hardware Manual ENGLISH
5-6 Chapter 5Receiving Faxes
Receiving Faxes Manually: MANUAL MODE
See page 5-3 to select Manual Mode.
To use this feature, the optional handset or a telephone must be plugged into the
telephone jack of the MultiPASS C50. See ”Connecting the Optional Handset, a
Telephone or Answering Machine” on page 2-17. You must also use the
MultiPASS Desktop Manager to enable the REMOTE RX setting and select the
two-digit ID code (the default code is 25). For details, see the MultiPASS
Desktop Manager User’s Guide.
If you use your MultiPASS C50 with MANUAL MODE, answer incoming calls
as follows:
1. When the MultiPASS C50 rings, pick up the handset.
If you hear a person’s voice:
2. Start your conversation. If the caller wants to send a document after talking
to you, wait on the line until you hear a slow beep, then press START/COPY
to begin receiving the document.
If you hear a slow beep or silence:
2. A fax machine is trying to send you a document.
Press START/COPY on the MultiPASS C50.
-or-
Enter the two-digit ID code from the extension phone, then hang up.
2
5
Ex:
½ The MultiPASS C50 then begins receiving the document. (This is
particularly convenient if your extension phone is located away from the
MultiPASS C50.)
½ If you do not hang up after pressing the two-digit ID code, the unit beeps
intermittently for a few seconds after you receive the document. (You can
turn the beeping off by disabling the OFFHOOK ALARM from the
Desktop Manager. See the MultiPASS Desktop Manager User’s Guide for
details.)