Cisco Systems OL-13599-01 Server User Manual


 
A-3
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Appendix A Voice Cards and PIMG Units
Intel Dialogic D/41EPCI, D/41JCT-LS, and D/41JCT-Euro
Each Intel Dialogic card in the Cisco Unity server or expansion chassis must have a unique value,
starting with 1 and continuing in sequence on subsequent cards. For example, set the rotary switch on
the first three voice cards as shown below. This is also the order in which you install the cards in the
server or expansion chassis.
Step 2 Set SW2 switches to Off on each card.
Step 3 Settings for jumpers JP2 through JP5 depend on the number of D/41EPCI voice cards in the Cisco Unity
server or expansion chassis:
Figure A-4 D/41EPCI Jumpers JP2 Through JP 5: Off
Figure A-5 D/41EPCI Jumpers JP2 Through JP 5: On
Step 4 On jumpers JP6 and JP7, install shunts on the top two pins (1 and 2).
One card
Set jumpers JP2 through JP5 to Off (Figure A-4) on
the card.
Two cards
Set jumpers JP2 through JP5 to On (Figure A-5) on
both cards.
Three or more cards
Set jumpers JP2 through JP5 to On (Figure A-5) on the
first and last cards.
Set jumpers JP2 through JP5 to Off (Figure A-4) on all
other cards.
55486
First card
Second card
Third card
1
2
3
55487
Setting
JP2
JP3 JP4 JP5
55488
Setting
JP2
JP3 JP4 JP5
55489
Setting
JP6
JP7