Filter
Top Products
8-10
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 8 Installing and Configuring Cisco Unity Software
Installing and Configuring Cisco Unity Software
Setting Up the Cisco PCA to Use SSL by Creating a Local Certificate Without a Certificate Authority
To Set Up the Cisco PCA to Use SSL by Creating a Local Certificate Without a Certificate Authority
Step 1 On the Set Up the Cisco Personal Communications Assistant to Use SSL page, click Create a Local
Certificate Without a Certificate Authority.
Step 2 Click Internet Services Manager.
Step 3 Expand the name of the Cisco Unity server.
Step 4 Right-click Default Web Site, and click Properties.
Step 5 In the Default Web Site Properties dialog box, click the Directory Security tab.
Step 6 Under Secure Communications, click Server Certificate.
Step 7 On the Web Server Certificate wizard Welcome page, click Next.
Step 8 Click Create a New Certificate, and click Next.
Step 9 Click Prepare the Request Now, But Send It Later, and click Next.
Step 10 Enter a name and a bit length for the certificate.
We strongly recommend that you choose a bit length of 512. Greater bit lengths may decrease
performance.
Step 11 Click Next.
Step 12 Enter the organization information, and click Next.
Step 13 For the common name of the site, enter either the system name of the Cisco Unity server or the fully
qualified domain name.
Caution The name must exactly match the host portion of any URL that will access the system by using
a secure connection.
Step 14 Click Next.
Step 15 Enter the geographical information, and click Next.
Step 16 Specify the certificate request file name and location, and write down the file name and location because
you will need the information later in this procedure.
Step 17 Click Next.
Step 18 Verify the request file information, and click Next.
Step 19 Click Finish to exit the Web Server Certificate wizard.
Step 20 Click OK to Close the Default Web Site Properties dialog box.
Step 21 Close the Internet Services Manager window.
Step 22 In the Cisco Unity Installation and Configuration Assistant, in the Enter Certificate Request File box,
enter the full path and file name of the certificate request file that you specified in
Step 16.
Step 23 Click Create Certificate.
Step 24 Click Internet Services Manager.
Step 25 Expand the name of the Cisco Unity server.
Step 26 Right-click Default Web Site, and click Properties.