Filter
Top Products
C-3
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Appendix C Installing and Configuring a Voice-Recognition Server
Installing the Required Windows Server 2003 Service Pack and Updates, and Cisco Security Agent for Cisco Unity
To Create the Partition
Step 1 Log on to Windows as a member of the Administrators group.
Step 2 On the Windows Start menu, click Programs > Administrative Tools > Computer Management.
Step 3 In the console tree under Storage, click Disk Management.
Step 4 Right-click the unallocated region after the C: partition, and click New Partition.
Step 5 On the New Partition Wizard, click Next.
Step 6 Click Extended Partition, and click Next. (Do not click Primary Partition.)
Step 7 Specify to use the remaining disk space, and click Next.
Step 8 Verify the settings, and click Finish.
Step 9 In the Disk Management utility, right-click the new partition, and click New Logical Drive.
Step 10 On the Create Partition Wizard welcome screen, click Next.
Step 11 Click Logical Drive, and click Next.
Step 12 Specify to use the maximum disk space, and click Next.
Step 13 Assign a drive letter, and click Next.
Step 14 Specify the NTFS file system format, and click Next.
Step 15 Verify the settings, and click Finish.
Installing the Required Windows Server 2003 Service Pack and
Updates, and Cisco Security Agent for Cisco
Unity
Revised May 1, 2008
Caution Do not install the latest Windows Server 2003 service pack that is recommended for use with the
Cisco
Unity voice recognition yet. If a service pack was qualified for use with the current version of
Cisco
Unity voice recognition after the current version was released, it was not tested with Cisco Unity
voice-recognition Setup and may cause Setup to fail.
You install the required Windows Server 2003 service pack from the applicable Cisco Unity Service
Pack
CD. The contents of the service pack CDs is listed in the Release Notes for Cisco Unity for your
version of Cisco
Unity. Release Notes for Cisco Unity are available at
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_release_notes_list.html.
You run the Cisco Unity Server Updates wizard that you downloaded in the “Downloading Software for
the Installation” section on page 2-2 to install the Microsoft updates that apply to Cisco Unity voice
recognition and, optionally, to install Cisco Security Agent for Cisco Unity.
To Install the Required Windows Server 2003 Service Pack on the Cisco Unity Voice-Recognition Server
Step 1 On the applicable Cisco Unity Service Packs CD, browse to the directory
Windows_2003_SP<x>\Setup\I386, and double-click Update.exe.