Filter
Top Products
4-12
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 4 Installing the Operating System
Adding 3GB and userva Switches to the Boot.ini File
Step 9 In the Disk Management utility, right-click the new partition, and click New Logical Drive (Windows
Server
2003) or Create Logical Drive (Windows 2000 Server).
Step 10 On the Create Partition Wizard welcome screen, click Next.
Step 11 Click Logical Drive, and click Next.
Step 12 Specify to use the maximum disk space, and click Next.
Step 13 Assign a drive letter, and click Next.
Step 14 Specify the NTFS file system format, and click Next.
Step 15 Verify the settings, and click Finish.
Step 16 Repeat Step 4 through Step 15 for each partition that you have to create.
Adding 3GB and userva Switches to the Boot.ini File
If the Cisco Unity server will be configured for more than 96 voice messaging ports, do the following
procedure.
To Add 3GB and userva Switches to the Boot.ini File
Step 1 Open the c:\boot.ini file in a text editor.
Step 2 Add /3GB /userva=2800 to the line that includes WINDOWS="Microsoft Windows 2003 Server". For
example:
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Standard" /fastdetect /No
Execute=OptOut
/3GB /userva=2800
Step 3 Restart the server.