Filter
Top Products
8-3
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 8 Installing and Configuring Cisco Unity Software
Installing and Configuring Cisco Unity Software
Do the procedure in this section if you plan to set up Cisco Unity to use SSL and you want to use the
Microsoft Certificate Services available with Windows to issue your own certificate. You may install the
component on the Cisco
Unity server or on another server.
To Install the Microsoft Certificate Services Component
Step 1 On the server that will act as your certificate authority (CA) and issue certificates, on the Windows Start
menu, click Settings
> Control Panel > Add/Remove Programs.
Step 2 Click Add/Remove Windows Components.
Step 3 In the Windows Components dialog box, check the Certificate Services check box. Do not change any
other items. When the warning appears about not being able to rename the computer, or to join or be
removed from a domain, click Ye s.
Step 4 Click Next.
Step 5 Click Stand-alone Root CA, and click Next. (A stand-alone CA is a CA that does not require Active
Directory.)
Step 6 Follow the on-screen prompts to complete the installation. For information, refer to the Windows
documentation.
If a message appears that Internet Information Services is running on the computer and must be stopped
before proceeding, click OK to stop the services.
Step 7 In the Completing the Windows Components Wizard dialog box, click Finish.
Step 8 Close the Add Remove Programs dialog box and Control Panel.
Installing and Configuring Cisco Unity Software
To install and configure Cisco Unity software, you use the Cisco Unity Installation and Configuration
Assistant to run seven programs in a specific order. The programs:
• Check the system and install the Cisco Unity software.
• Install the Cisco Unity licenses.
• Configure the Cisco Unity services.
• Configure Cisco Unity for the message store.
• Set new default passwords for the Default Administrator and the Default Subscriber templates
• Integrate Cisco Unity with the phone system.
• Configure the Cisco Personal Communications Assistant to use SSL.
Do the following seven subsections in the order listed.
Starting the Cisco Unity Installation and Configuration Assistant and Installing
Cisco
Unity Software
From the Cisco Unity Installation and Configuration Assistant, you run the Cisco Unity Setup program
first to install Cisco
Unity. The Setup program checks the system, then installs the Cisco Unity software.