Filter
Top Products
2-2
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 2 Preparing for the Installation
Downloading Software for the Installation
–
If you are integrating Cisco Unity with Cisco Unified Communications Manager (CM)
(formerly known as Cisco Unified CallManager), release notes for the applicable version of the
Cisco
Unity-CM TSP.
–
The System Administration Guide for Cisco Unity.
–
If you are setting up Cisco Unity Digital Networking, AMIS or VPIM networking, or Internet
subscribers, the Networking Guide for Cisco
Unity.
–
If you are setting up Bridge Networking, release notes for the applicable version of the
Cisco
Unity Bridge, the Installation Guide for Cisco Unity Bridge, and the Networking Guide
for Cisco
Unity Bridge. Also, release notes for the applicable version of Cisco Security Agent
for Cisco
Unity Bridge, if applicable.
Cisco Unity documentation is available at
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/tsd_products_support_series_home.htm
l.
• Two test phones.
Downloading Software for the Installation
Revised May 1, 2008
This section lists the software needed to install Cisco Unity. If your Cisco Unity DVDs are an earlier
version than the currently shipping version, download all of the software listed in this section.
Note the following considerations:
• The downloads may total several GB. Use a computer with a high-speed Internet connection, and
confirm that the computer has sufficient disk space or has access to a network drive with sufficient
disk space.
• Most downloads are self-extracting executable files. When downloads are complete, extract the
updates and burn DVDs that contain the extracted files. Then delete the downloaded .exe files to free
disk space.
For detailed instructions on downloading software and burning DVDs, refer to the “Installation and
Upgrade Information” section of the applicable release notes, available at
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_release_notes_list.html.
Caution Until you have installed all of the recommended service packs and updates, and, optionally,
Cisco Security Agent for Cisco
Unity and antivirus software, third-party components installed
on the Cisco
Unity server have significant security vulnerabilities. Do not connect the
Cisco
Unity server to the network to install software. Instead, burn DVDs that contain the
downloaded software, and install the software from the DVDs.
• The Cisco Unity documentation instructs you when to install the software you download.
Note To access the software download page, you must be logged on to Cisco.com as a registered user.
Download the following software for all installations. Even if you have Cisco Unity DVDs for the
currently shipping version, we recommend that you download the software, some of which may have
been released or updated after the discs were produced.