Filter
Top Products
B-1
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
APPENDIX
B
Exiting and Starting the Cisco Unity Software and
Server
This appendix contains the following sections:
• Exiting the Cisco Unity Software, page B-1
• Shutting Down or Restarting the Cisco Unity Server, page B-3
• Starting the Cisco Unity Software, page B-3
Exiting the Cisco Unity Software
This section contains two procedures for exiting the Cisco Unity software: from the Cisco Unity server
and from another computer.
Caution Do not use Kill av*.* to exit the Cisco Unity software. Kill av*.* does not stop all Cisco Unity services.
Do not stop AvCsMgr by using the Services window or the Component Services window as a method to
exit the Cisco
Unity software. Stopping the AvCsMgr does not stop all Cisco Unity services and may
cause unexpected results.
To Exit the Cisco Unity Software from the Cisco Unity Server
Step 1 If the system uses the automated attendant, route all calls to the operator.
Step 2 On the Cisco Unity server, log on to Windows by using either the Cisco Unity administration account or
an appropriate Windows domain account.
Step 3 Right-click the Cisco Unity icon in the status area of the taskbar.
(If the Cisco Unity icon is not in the taskbar, browse to the CommServer directory, and double-click
AvCsTrayStatus.exe.)
Step 4 Click Stop Cisco Unity.
Step 5 Click OK to confirm that you want to exit the Cisco Unity software. Cisco Unity stops running when all
calls are finished, and an “X” appears in the Cisco
Unity icon.
Step 6 Press Ctrl-Alt-Delete, then lock or log off of Windows to prevent access by unauthorized users.