Filter
Top Products
A-9
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Appendix A Voice Cards and PIMG Units
Intel Dialogic D/240PCI-T1
Figure A-10 D/240PCI-T1 Connection Pinouts and Backplate
Hardware Settings
To Set the D/240PCI-T1 Card Switches and Jumpers
Step 1 Set the rotary switch (SW100) to a unique value.
Each Intel Dialogic card in the Cisco Unity server or expansion chassis must have a unique value,
starting with 1 and continuing in sequence on subsequent cards. For example, set the rotary switch on
the first three voice cards as shown below. This is also the order in which you install the cards in the
server.
55481
Pin 1: Receive ring
Pin 2: Receive tip
Pin 3: Chassis ground
Pin 4: Transmit ring
Pin 5: Transmit tip
Pin 6: Chassis ground
Pin 7: Chassis ground
Pin 8: Chassis ground
55479
T1 trunk
interface
LED status
indicators
1
O
N
55486
First card
Second card
Third card
1
2
3