Cisco Systems OL-13599-01 Server User Manual


 
CHAPTER
5-1
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
5
Customizing the Cisco Unity Platform
In this chapter, you do the following tasks in the order listed:
1. If the Cisco Unity server contains a dual NIC: Configure the dual NIC or verify the configuration.
See the
“Configuring a Dual NIC in the Cisco Unity Server” section on page 5-2.
2. Complete registration information on Cisco.com to obtain the applicable license files. See the
“Obtaining Cisco Unity License Files” section on page 5-4.
3. Use the Cisco Unity System Preparation Assistant to install required Windows components, the
browser and database, and required service packs. See the
“Running the Cisco Unity System
Preparation Assistant” section on page 5-6.
4. If the system is using MSDE 2000: Install Enterprise Manager, and set the MSDE system
administrator password. See the
“Installing Administration Software for MSDE 2000 and Setting
the MSDE System Administrator Password” section on page 5-9.
5. Change folder settings in Windows Explorer so that all files and folders are visible during
Cisco
Unity troubleshooting, if applicable. See the “Changing Folder Settings in Windows
Explorer” section on page 5-10.
6. Run the Cisco Unity Server Updates wizard to install Microsoft security updates and, optionally,
Cisco Security Agent for Cisco
Unity. See the “Installing Microsoft Updates and Cisco Security
Agent for Cisco Unity” section on page 5-10.
Caution Do not install the latest service packs that are recommended for use with Cisco Unity yet. Any
service packs qualified for use with the current version of Cisco
Unity after the current version
was released have not been tested with Cisco Unity Setup and may cause Setup to fail.
7. If the Cisco Unity server contains voice cards: Disable the Found New Hardware wizard, if
applicable. See the
“Disabling the Found New Hardware Wizard for the Voice Cards” section on
page 5-11.
8. Optional: Install antivirus software. See the “Installing Antivirus Software (Optional)” section on
page 5-12.
9. Connect the Cisco Unity server to the network. See the “Connecting the Cisco Unity Server to the
Network” section on page 5-12.