Filter
Top Products
Chapter 3 Disassembly and Maintenance
3-5. Disassembly, Reassembly and Lubrication
3-39 CL-S700/CL-S703/CL-S700R
(5) Removing the “SA, Rewinder Motor”
1. Remove the Rewinder Mechanism block referring to “(2) Removing the Rewinder
Mechanism block”.
2. Remove 2 screws (PHT (#2), M3x6) and detach the “Guide, Motor Plate”.
3. Unhook the “Spring, Rewinder Motor”, disengage 1 E-ring (E-Ring, 3), remove 1 screw (PH
(SW+PW), M3x5), and detach the “Pivot, Rewinder Motor Plate”.
4. While pushing down the Measure Flap block, remove the “SA, Rewinder Motor” to the right.
Note on reassembling:
• After assembling the “SA, Rewinder Motor” on the frame, be sure that it can smoothly turn.
(The pivot is the supporting point of the “SA, Rewinder Motor”.)
PHT (#2), M3x6
Guide, Motor Plate
SA, Rewinder Motor
E-Ring, 3
Pivot, Rewinder Motor Plate
Spring, Rewinder Motor
PH (SW+PW), M3x5
(Measure Flap Block)