Filter
Top Products
Chapter 4 Troubleshooting
4-2. Troubleshooting
4-15 CL-S700/CL-S703/CL-S700R
(2) Rewinder sensor problem (CL-S700R Only)
Symptoms Checks Remedies
Rewinder cover is
closed, but rewinder
cover open status is
detected.
(LCD shows “Error
Rewinder Open”.)
1. Rewinder cover sensor (“SA, Interlock
SW”) is defective.
2. Failure in the “SA, Rewinder Motor”.
3. Failure in the “SA, Rewinder PCB”.
4. Failure in the control circuit.
1. Replace the “SA, Interlock SW”.
2. Replace the “SA, Rewinder Motor”.
3. Replace the “SA, Rewinder PCB”.
4. Replace the “SA, Main PCB”.
Rewinder motor
rotation is not
detected.
(LCD shows “Error
Rewinder Fail”.)
1. Failure of photo interrupter PS701of the
“SA, Rewinder Motor”.
2. Failure in the “SA, Rewinder PCB”.
3. Failure in the control circuit.
1. Replace the “SA, Rewinder Motor”.
2. Replace the “SA, Rewinder PCB”.
3. Replace the “SA, Main PCB”.
Rewind Full status is
not detected or
rewinding speed is
not properly
controlled.
1. Failure of photo interrupter PS501/
PS502 of the “SA, Rewinder PCB”.
2. Failure in the control circuit.
1. Replace the “SA, Rewinder PCB”.
2. Replace the “SA, Main PCB”.
Peeled label is not
detected.
1. Failure of Peel Sensor.
2. Failure in the “SA, Rewinder PCB”.
3. Failure in the control circuit.
1. Replace the “SA, Peel Sensor”.
2. Replace the “SA, Rewinder PCB”.
3. Replace the “SA, Main PCB”.