Filter
Top Products
Chapter 2 Operating Principles
2-3. Operation Panel
2-43 CL-S700/CL-S703/CL-S700R
[Print sample]
Machine Information
Model Number : CL-S700
Boot Version : ****
ROM Version : ********
ROM Date(DD//MM//YY) : XX/XX/XX
ROMCheck Sum : ****
Head Check : OK
Print Counter : 0002.234 km
Service Counter : 0002.234 km
Sensor Monitor : 1.50 V
Option Interface : None
Factory Mode Settings
Fix Through Sensor Pos. : 0 dot
Fix Reflect Sensor Pos. : 0 dot
Adj Through Sensor Pos. : 0 dot
Adj Reflect Sensor Pos. : 0 dot
Machine Tear Position : 0 dot
Machine Cut Position : 0 dot
Machine Peel Position : 0 dot
Machine Horizontal Pos. : 8 dot
AutoCal Mode : On
Fix Through Sensor : 0.0 V
Fix Reflect Sensor : 0.0 V
Adj Through Sensor : 0.0 V
Adj Reflect Sensor : 0.0 V
Fix Through Cal Level : 2.30 V
Fix Reflect Cal Level : 2.10 V
Fix SensNone Cal Level : 2.05 V
Adj Through Cal Level : 2.30 V
Adj Reflect Cal Level : 2.10 V
Adj SensNone Cal Level : 2.05 V
Double Heat Menu : Off
PowerOn Head Check : On
Head Check Start Pos. : Dot 1
Head Check Stop Pos. : Dot 848
Head Error Print : No
Max Page Length : 32 inch
Ribbon End Detection : Normal
Void to TOF : Off
Reverse Media Length : 0.00 inch
Paper End Sensor : On
Parallel Error Output : On
Auto Online : Off
Auto Online Delay : 2 sec
Top Form Sensing : On
USB Serial Number : Off
Current Menu Settings
[Page Setup Menu]
Print Speed : 7 IPS
Print Darkness : 12
Darkness Adjust : 00
Print Method : Thermal Transfer
Continuous Media Length : 4.00 inch
Vertical Position : 0.00 inch
Horizontal Shift : 0.00 inch
Vertical Image Shift : 0.00 inch
Sensor Select : Rear Adj Sensor
Media Sensor : See Through
Small Media Adjustment : Off
Small Media Length : 1.00 inch
Symbol Set : PM
<Example of Datamax
®
emulation selected (CL-S700)>
Submenus for maintenance only