Filter
Top Products
Chapter 3 Disassembly and Maintenance
3-4. Maintenance Tools List
CL-S700/CL-S703/CL-S700R 3-6
3-4. Maintenance Tools List
Maintenance tools shown below are needed when replacing the maintenance parts such as the
“SA, Main PCB” and “Unit, Motor”.
Maintenance Tools List
No. Name Q'ty Description Remarks
1 Phillips Screwdriver
(Length 200 mm)
1 For 3~4 mm screws
2 Phillips Screwdriver
(Length 100 mm)
1 For 2~3 mm screws
3 Flat-blade Screwdriver
(Length 100 mm)
1 4.3 mm width
4 Tweezers 1
5 Round Nose Pliers 1
6 Cutting Nippers 1
7 Soldering Iron (30W) 1
8 Volt-ohm Meter 1
9 Spring Gauge 1 2000gf Belt tension adjustment
10 Spring Gauge 1 500gf Ribbon tension adjustment
11 Hex Wrench 1
Ribbon tension adjustment
12 Weight 1 450g Ribbon tension adjustment
2 mm