Filter
Top Products
Chapter 1 Specifications
1-1. General Specifications
1-3 CL-S700/CL-S703/CL-S700R
1-1. General Specifications
Printing
Printing method Thermal transfer/Direct thermal
Main scanning line density:
203 dots/inch (8 dots/mm) (CL-S700/CL-S700R)
300 dots/inch (11.8 dots/mm) (CL-S703)
Sub-scanning line density:
203 dots/inch (8 dots/mm) (CL-S700/CL-S700R)
300 dots/inch (11.8 dots/mm) (CL-S703)
Resolution
Head 864 dots (printable dots: 832 dots) (CL-S700/CL-S700R)
Head 1275 dots (printable dots: 1240 dots) (CL-S703)
Max. print width 104 mm (CL-S700/CL-S700R)
105 mm (CL-S703)
4.1 inch (CL-S700/CL-S700R)
4.1 inch (CL-S703)
Max. print length 812.8 mm 32 inch
Print density Print density is adjustable with software
Printing speed setting 2 - 10 inches per second (CL-S700/CL-S700R)
2 - 8 inches per second (CL-S703)
*2-7 inches per second (CL-S700/CL-S703 with optional peeler)
Print mode
Batch mode Normal printing (single or multiple sheets)
Tear off mode Feeds back media to the tear-off position after printing is completed.
Cut mode *
1
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are done.
• Back feed
• Cut through
(Cut through refers to stopping part-way through printing the ‘next
label’ to make the cut. After cutting, printing restarts but there is a
chance of a small gap or mark at the temporary stop position.)
Peel mode*
2
Peels labels from the liners after printing them.
Media
Types of media Roll, fanfold
(continuous media, die-cuts, continuous tags, paper or tickets)
Recommended media Thermal transfer: label media (RPR-W Ricoh)
Direct thermal media: label media (150LA-1 Ricoh),
tag media (TB2E0V, Mitsubishi Paper)
Max. media width 118.0 mm 4.65"
Min. media width 25.4 mm 1.00"
Min. label width 7.62 mm 0.30"
*1,*2: Options can be separately purchased.