Filter
Top Products
Advanced Features 7-7
7 Enter the team name and select the appropriate team mode. The types of team
include Smart Load Balance and Fail Over, FEC/GEC, and Link Aggregation
(IEEE 802.3ad).
8 Click OK.
9 Select the team name in the Configuration box.
10 Select an unassigned adapter to add to the team and click > adjacent to Team
Members to add the adapter. Repeat for the second adapter.
NOTE: Alteon and Broadcom Ethernet adapters can be grouped into failover teams with an
Intel 82559 LOM; however, assigning a LOM to be a primary adapter is not supported.
11
Click OK.
Removing an Adapter From a Network Team
To remove an adapter from a network team through the Network Teaming utility, Broadcom
Advanced Server Control Suite, perform the following steps:
1 Click Maintenance.
2 Click Terminal Services.
3 Log into the Terminal Services session as administrator.
4 Under Administrative Tools on the Advanced Administration Menu, click Broadcom
Network Teaming. The Broadcom Advanced Server Control Suite window is
displayed on the desktop.
5 Click the tab on the Load Balance/Virtual LAN folder.
6 Select the team name in the Configuration box.
7 Select an adapter in Team Members and click < adjacent to Team Members to
remove the adapter.
8 Click OK to apply the change.