Filter
Top Products
Advanced Features 7-29
To obtain a server certificate, perform the following steps:
1 On the PowerVault NAS Manager primary menu, click Maintenance.
2 On the Maintenance page, click Terminal Services.
3 Log on to an Terminal Services Advanced Client session.
4 In the Advanced Administration Menu, click System Management, and then from
the list, click Internet Information Services
5 Navigate to and right-click on the Administration site section, and select Properties
6 Under Secure Communications on the Directory Security property sheet, click Server
Certificate to access the Web Server Certificate Wizard.
7 Use the Web Server Certificate Wizard to create a certificate request.
8 Send the certificate request to the certification authority.
They will process the request and send you the certificate.
NOTE: Some certification authorities require you to prove your identify before processing
your request or issuing you a certificate.
9
Use the Web Server Certificate Wizard to install your certificate.
For more information about SSL, see the Internet Information Services online help.
Console Redirection
Console redirection allows you to maintain a NAS appliance from a remote location by
redirecting keyboard input and text output through the serial port. Graphic output is not
redirected. Console redirection can be used under the disk operating system (DOS) for
tasks such as setting up a common basic input/output system (BIOS) configuration or
setting up a redundant array of independent disks (RAID) configuration. In a typical
installation, the system is connected to a port concentrator that allows you to connect
several systems via a shared modem. After you use a modem or other remote connection to
log into the port concentrator, you can select which system you want to manage with
console redirection. This document describes the simplest connection possible: connecting
to a system with a null modem cable.