Filter
Top Products
Advanced Disk and Volume Management Using Array Manager 3-9
3 From the pull-down menu, choose the policies you want.
You can enable or disable the write-cache or enable or disable the read-cache.
4 Click OK to continue or Cancel to quit the operation.
When you are finished, click Properties to verify if the policy changes occurred.
Using Check Consistency
If your disk is in a degraded state, using Check Consistency might enable you to restore
your disk to Ready status.
To check mirror synchronization and rebuild parity if necessary, perform the following steps:
1 Right-click the virtual disk to be checked.
2 Click Check Consistency.
The Check Consistency operation displays progress information in the right pane.
3 To view progress, click the parent of the virtual disk.
The status of the virtual disk is Resynching, and progress information displays until
the operation is finished.
Initializing Virtual Disks
Initialize any virtual disk before you use it.
Perform the following procedure on any virtual disk on a PERC 3/DC or PERC 3/QC
controller system.
NOTICE: All data on the virtual disk is lost when the disk is initialized.
1
Right-click the virtual disk that you want to initialize.
2 Click Initialize.
The status of the disk displays Initializing in the right pane until the operation is
finished.
Properties
This command displays a window that shows the properties associated with the virtual disk.