Dell 750N. 755N Server User Manual


 
Online Server Diagnostics 8-5
To run diagnostics on a remote appliance on the network, specify the IP address of the
remote appliance in the Remote IP Address box, and then click Run diagnostics on
specified IP.
In the remote login window, type the user ID of a local administrator group member
for the specified appliance in the User Name box, and click Login.
This action opens the main window, from which you may select and run diagnostic
tests.
Configuring Online Server Diagnostics
Server Diagnostics enables you to set the preferred options for running diagnostic tests.
To set the options in Server Diagnostics, perform the following steps:
1 If you have not already done so, start the Server Diagnostics.
2 Specify a target NAS appliance.
3 In the main window, click Advanced Settings.
4 In the Advanced Settings window, set the options you need. See “Advanced Settings”
for a description of each option.
Running Online Server Diagnostics
To run a diagnostic, perform the following steps:
1 If you have not already done so, start the Server Diagnostics.
2 Specify a target NAS appliance.
3 In the main diagnostics window, use the component selector to specify the
components you want to test.
Use the diagnostic tree to select the individual tests you want to run.
•Click Select All to select all tests in the tree. To erase your selections, click Clear
All.
4 Click Next.
The Progress window opens and the diagnostic tests begin. Use the progress viewer to
monitor the success or failure of each test.
5 When the tests finish, click View Log to see detailed results for each test.