Filter
Top Products
System Recovery, Backup, and Restore 5-9
Installing ARCserve 2000
To use ARCserve 2000 to back up your system, you must first install ARCserve 2000 on the
NAS appliance, and then install ARCserve Manager on a remote system.
Installing ARCserve 2000 on the NAS Appliance
NOTE: You must first attach a keyboard, mouse, and monitor to the system before you install
ARCserve 2000. ARCserve 2000 cannot be installed or managed using Terminal Services.
1
Insert the ARCserve 2000 CD in the CD drive of the NAS appliance.
The CD should autoplay.
2 If the CD does not autoplay, open Windows Explorer and right-click the CD drive that
contains the ARCserve 2000 software.
3 Select Autoplay from the menu.
The ARCserve 2000 Product Explorer window displays.
4 Follow the instructions in the documentation that came with your backup software.
Installing ARCserve Manager on the Remote System
1 Insert the ARCserve 2000 CD in the CD-ROM drive of the remote system.
The CD should autoplay.
2 If the CD does not autoplay, open Windows Explorer and right-click the CD-ROM
drive that contains the ARCserve 2000 software.
3 Select Autoplay from the menu.
The ARCserve 2000 Product Explorer window displays.
4 Follow the instructions in the documentation that came with your backup software.
Using ARCserve 2000 Remote Manager
1 On the remote system, click the Start button, point to Programs—> ARCserve—>
ARCserve Manager.
The ARCserve Quick Access window displays.
The ARCserve Quick Access window provides wizards for many common backup
tasks. You can use these wizards or go through the standard menus to perform your
backup tasks.