Digi MIL-3000FTX Printer User Manual


 
MIL-3000FTX Series of FastPort Print Servers 1-1
Chapter 1
Introduction and Installation
Chapter 1 gives a description on the MIL-3000FTX FastPort print servers.
1.1 Overview of the MIL-3000FTX Print Servers
The MIL-3000FTX FastPort print servers are 10/100 Mbps, stand-alone
print servers. These print servers are to be connected directly to multiple
printers on Ethernet and/or Fast Ethernet networks. Versions include:
MIL-3100FTX
: One RJ-45 (UTP), 10/100 Mbps port; one parallel port
and one serial port
MIL-3200FTX
: One RJ-45 (UTP), 10/100 Mbps port; two parallel port
and one serial port
MIL-3310FTX
: One RJ-45 (UTP), 10/100 Mbps port; three parallel port
and one serial port
All FastPorts recognize the speed of a network using auto-negotiation.
1.2 Features of the Print Servers
1.2.1 Physical Features
10/100BASE-TX, RJ-45 connector
Centronics compatible parallel port(s)
RS-232 serial port
Four position DIP switch
1.2.2 Configuration Features
FastManage SNMP manager for Windows
On-board diagnostic utilities can also be accessed on-line
Apple users can configure FastPort by downloading configuration files