Filter
Top Products
MIL-3000FTX Series of FastPort Print Servers 10-8
Parameters for the parallel port includes:
• Serial Printer Setup-->Printer 1: Sets serial port 1’s parameters.
-->
Printer 2 (optional): Sets serial port 2’s parameters.
Note:
The number of printers to configure depends on the number of serial ports on the
FastPort.
Parameters for the serial port includes:
Figure 10-12. Ethertalk Serial Printer Menu
10.4.5SMB Config.
There are a series of choices that can be selected to configure FastPort for a
SMB network, including:
• SMB Config. --> HP DLC: Enables/disables HP’s DLC protocol.Default: Disabled.
-->
SMB Enabled: Enables/disables SMB protocol. Default: Enabled.
-->
SMB Names: Sets the SMB workgroup and unique identification. Default:
Disabled.
-->
SMB Share Names: Sets the aliases of the printer port. Default: Disabled
(Refer to Figure 10-13).
Figure 10-13. SMP Share Name Menu