Filter
Top Products
MIL-3000FTX Series of FastPort Print Servers 8-4
• Maximum Retry Time and click Next. Default is 5.
Figure 8-2. Configuring Advanced Parameters
8.2.2.1General Parameters
The “General Parameters” has more options to configure.
Figure 8-3. General Parameters
• Show Node Name: If selected, this parameter displays a host name for
all the devices discovered. FastManage needs a hosts file in the C:\ETC
directory for a host name to be displayed. Checked by default.
• Show Node Address: If this selection is checked, FastManage displays
IP and IPX addresses for all the devices discovered. Not checked by
default.
• Load Saved Maps: If this parameter is selected, the software loads the
saved Map when starting the Discovery Application. Checked by
default.