Filter
Top Products
10. Make sure the left sprocket unit is as far to the right as it
will go. This places the left perforation at the left edge of
the printable area. Then lower the sprocket-lock lever to
lock the left sprocket unit.
11. Slide the right sprocket unit to remove any slack in the
paper. Then lower the sprocket-lock lever into place.
12. Reattach the manual feed guide to the printer. Match the
holes of the guide to the pins on both sides of the printer
and push until they click into place.
L102-3
L103
7
R
Loire2 Ref. Guide
Rev.c
A5 size Chapter 7
11-11-96 DR, pass 0
Paper Handling
7-13