Filter
Top Products
The printer driver settings
are not correct.
Check the printer driver settings to
make sure they are appropriate. If
these settings are correct, check your
application because some driver
settings are overridden by application
settings. Also, for more information on
making driver settings, see Chapter 4
for Windows, or Chapter 6 for
Macintosh.
High Speed mode is selected
in the printer driver.
To obtain higher quality output, make
sure High Speed mode is not selected.
For DOS users:
The print direction setting is
set to Bi-D in the
default-setting mode.
To obtain higher quality output, set
the print direction to Uni-D in the
default-setting mode as described in
“Changing the default settings” in
Chapter 8.
Colors are different than you expect.
Cause What to do
The color print head nozzles
are clogged.
Clean the color print heads as
described in “Cleaning the Print
Heads” on page 10-36.
Black ink is selected in your
printer driver.
Set the Ink setting to
Color
.
You are not printing on the
correct side of the paper.
Check the paper packaging for the
correct side for printing; then load the
printable side of the paper face down
in the sheet feeder. When using the
manual feed slot or tractor feeder, load
paper printable side up.
10
Troubleshooting
R
Loire2 Ref. Guide
Rev.c
A5 size Chapter 10
11-11-96 DR, pass 0
Troubleshooting
10-29