Filter
Top Products
Maintenance and Transportation 299
7
7
7
7
7
7
7
7
7
7
7
7
English
Replacing the Maintenance Tank
If the maintenance tank icon tells that the maintenance tank is full
or near full on the LCD, replace the maintenance tank.
To check the product code of the Maintenance Tank, see
“Consumable Products” on page 375.
To replace the maintenance tank, follow the steps below.
1. Open the package of a new maintenance tank.
2. Put your hand on the handle on the side of the printer, then
gently pull the maintenance tank outward.
Note:
EPSON Stylus Pro 9800/9400 has two maintenance tanks. Make
sure which maintenance tank is needed to be replaced with the
message on the LCD.
3. Put the used maintenance tank in the plastic bag provided.
Note:
Do not tilt the used maintenance tank until after it is sealed in the
plastic bag.
4. Insert the new maintenance tank into the place.