Filter
Top Products
Maintenance and Transportation 317
7
7
7
7
7
7
7
7
7
7
7
7
English
3. Release the front casters and retract the stabilizer knobs.
4. Move the printer to the place of use carefully. Relock the
casters and extend the stabilizer knobs after moving.
Setting up the printer after transporting it
The steps you need to take to set up the printer after transporting
it are almost identical to the steps carried out the first time you
set up the printer. When you set up the printer again, see the
Unpacking and Setup Guide, and note the following points.
❏ Do not forget to remove any protective materials.
❏ The first time you start printing after transporting the printer,
or if you have not turned on the printer for a long time, the
print head nozzles may be clogged. Epson recommends that
you perform a nozzle check and clean the print head, and also
realign the print head to ensure print quality.
To perform a nozzle check using the control panel, see
“Checking the print head nozzles” on page 224.